keywords: ip pbx voip gateway gsm gateway



The forum is in read only mode.
× Questions about B100/200/400/800 ISDN BRI Cards

Debian "Lenny" 5.0.3

14 years 6 months ago #4179 by mapleleaf
Do the OpenVox B100/B200/B400/B800 cards fully support Debian "Lenny" 5.0.3?
14 years 6 months ago #4184 by Denins.Den
Debian "lenny" have some some incompatibility problem with mISDN, please use centos5.x to try

14 years 5 months ago #4334 by b52
It's working fine with lenny..... :) :victory:
14 years 5 months ago #4388 by debianuser
To: b52
Hallo b52

can you sent me a step by step installation for the b100p in debian lenny?
I have a fresh installed debian lenny because i was trying a lot of times with the asteriskNOW 1.5 but the chan_misdn was not apear in the freePBX GUI. thatwhy i changed to debian.

thanx in advance!

sorry about my bad english
14 years 5 months ago #4390 by pemer

please look at this patch for debian lenny and the kernel verison 2.6.28

best regards
14 years 5 months ago #4405 by b52
Hi.... Install debian net install (150mb)

do it... step by step.. :)

apt-get install ssh
apt-get install build-essential
apt-get install libncurses-dev
apt-get install linux-headers-`uname -r`
apt-get install flex
apt-get install bc
apt-get install subversion
apt-get install cvs


download .. ( LibPRI ( Asterisk 1.4) (dahdi linux) (dahdi tools) (asterisk addons)

and important..... chan_misdn current stable from beronet...

Copy all .tar to /usr/src and make install

1) librpi
2) dahdi linux
3) dahdi tools
4) misdn
5) asterisk
6) asterisk add ons

before you make install asterisk run make menu select and check if is enable, that's it!!!! i setup B200P and it's stable rock with debian.

anything you want ask here...
Time to create page: 0.041 seconds
Powered by Kunena Forum