keywords: ip pbx voip gateway gsm gateway

Specifications:

OpenVox iAG200 Series Analog VoIP Gateway supports 2 FXS/FXO ports. With features of small size, exquisite enclosure and high performance, the iAG Analog VoIP Gateway is specially designed for saving space and maximizing cost savings, it is ideal for SMBs and SOHOs.

It can be configured for different country uses, provides a wide selection of codecs including G.711A、G.711U、G.729、G.722、G.726. The iAG Analog VoIP Gateways use standard SIP protocol and fully compatible with leading IMS/NGN platform, IPPBX and SIP servers. It has obtained professional CE certification.

 

Technical Specifications:

Models iAG200-O iAG200-OS
Ports 2 FXO ports 1 FXS and 1 FXO ports
Power Outage Escape Not Support Support
Ethernet Ports 2 * 10/100Mbps Ports
Weight 160g
Dimension 125mm*85mm*28.7mm
Power Supply 12V DC/1A
Maximum Power Consumption 6W
Operation Temperature 0°C ~ 50°C
Operation Humidity Range 10% ~ 90% NON-CONDENSING
Storage Temperature Range -20°C ~ 70°C
Short/Long Haul Ring Load 2 REN, up to 3km on 24AWG line
Certification CE

 

Software & Platform:

  • Linux OS
Features:

Physical Interfaces (Capacity & Ethernet Interfaces)

  • 2 FXS with RJ11
  • 2 FXO with RJ11
  • 1*WAN, 10/100Mbps, RJ-45
  • 1*LAN, 10/100Mbps, RJ-45

Voice & FAX

  • G.711A/U, G.729A, G.722, G.726, iLBC
  • Comfort Noise Generation (CNG)
  • Modem/POS
  • Adaptive (Dynamic) Jitter Buffer
  • Programmable Gain Control
  • DTMF mode: Signal/RFC2833/INBAND
  • T.38/Pass-through
  • Echo Cancellation (G.168), with up to 128ms

Call Features

  • Call Waiting
  • Blind Transfer
  • Attend Transfer
  • Call Forward on Busy
  • Call Forward on No Reply
  • Unconditional Call Forward
  • Warm/lmmediately Hotline
  • Message Waiting Indicator
  • SlP registration to different servers
  • Call Hold
  • Do-not-disturb
  • 3-Way Conference
  • Speed Dial

FXS

  • Connector: RJ11
  • Dial Mode: DTMF and Pulse
  • Pulse: 10 and 20 PPS
  • Caller ID: DTMF/FSK CLI Presentation
  • Max Cable Length:3 km
  • Reversed Polarity
  • Programmable Call Progress Tone

FXO

  • Connector: RJ11
  • Dial Mode: DTMF/Pulse Dialing
  • Caller ID: FSK, DTMF
  • Polarity Reversal
  • Answer Delay
  • Busy Tone Detection
  • No Current Detection

Software Features

  • Hunting Group
  • Web ACL
  • Telnet ACL
  • Action URL
  • PPPoE
  • OpenVPN
  • Digitmap
  • Routing Rules based Prefixes
  • Caller/Called Number Manipulation

VOIP (Protocol)

  • SIP v2.0 (UDP/TCP), RFC3261
  • SDP, RTP(RFC2833), RFC3262, RFC3263, RFC3264, RFC3265, RFC3515, RFC2976, RFC3311
  • RTP/RTCP, RFC2198, RFC1889
  • IPv4 and lPv6
  • Outbound Proxy
  • RFC2806 TEL URI
  • RFC3581 NAT, rport
  • VLAN 802.1P/802.1Q
  • RFC4028 Session Timer
  • DNS SRV/A Query/NATPR Query
  • NAT: STUN, Static/Dynamic NAT

Maintance

  • SNMP v1/v2/v3
  • Auto Provisioning
  • Web Configuration
  • Backup/Restore
  • Firmware Upgrade via Web
  • CDR
  • IPOE
  • Syslog(Emerg, alert, critical, error, warning, notice, info, debug)
  • Ping/Tracert Test
  • Network Capture
  • NTP/Daylight Saving Time
  • lVR local Maintenance
  • Cloud-based Management
Download:
Demo:

Online Demo

Username: viewer
Password: Viewer123!

Supports 2 FXS/FXO ports;

Specially designed for SMBs and SOHOs;

Use standard SIP protocol;

Compatible with leading IMS/NGN platform, IPPBX and SIP servers.

Specifications:

OpenVox iAG400 Series Analog VoIP Gateway supports 4 FXS/FXO ports. With features of small size, exquisite enclosure and high performance, the iAG Analog VoIP Gateway is specially designed for saving space and maximizing cost savings, it is ideal for SMBs and SOHOs.

It can be configured for different country uses, provides a wide selection of codecs including G.711A、G.711U、G.729、G.722、G.726. The iAG Analog VoIP Gateways use standard SIP protocol and fully compatible with leading IMS/NGN platform, IPPBX and SIP servers. 

 

Technical Specifications:

Models iAG400-S iAG400-O
Ports 4 FXS ports 4 FXO ports
Ethernet Ports 2 * 10/100Mbps Ports
Weight 176g
Dimension 150mm*100mm*28.7mm
Power Supply 12V DC/1A
Maximum Power Consumption 8W
Operation Temperature 0°C ~ 50°C
Operation Humidity Range 10% ~ 90% NON-CONDENSING
Storage Temperature Range -20°C ~ 70°C
Short/Long Haul Ring Load 2 REN, up to 3km on 24AWG line
Certification CE

 

Software & Platform:

  • Linux OS
Features:

Physical Interfaces (Capacity & Ethernet Interfaces)

  • 4 FXS with RJ11
  • 4 FXO with RJ11
  • 1*WAN, 10/100Mbps, RJ-45
  • 1*LAN, 10/100Mbps, RJ-45

Voice & FAX

  • G.711A/U, G.729A, G.722, iLBC
  • Comfort Noise Generation (CNG)
  • Modem/POS
  • Adaptive (Dynamic) Jitter Buffer
  • Programmable Gain Control
  • DTMF mode: Signal/RFC2833/INBAND
  • T.38/Pass-through
  • Echo Cancellation (G.168), with up to 128ms

Call Features

  • Call Waiting
  • Blind Transfer
  • Attend Transfer
  • Call Forward on Busy
  • Call Forward on No Reply
  • Unconditional Call Forward
  • Warm/lmmediately Hotline
  • Message Waiting Indicator
  • SlP registration to different servers
  • Call Hold
  • Do-not-disturb
  • 3-Way Conference
  • Speed Dial

FXS

  • Connector: RJ11
  • Dial Mode: DTMF and Pulse
  • Pulse: 10 and 20 PPS
  • Caller ID: DTMF/FSK CLI Presentation
  • Max Cable Length:3 km
  • Reversed Polarity
  • Programmable Call Progress Tone

FXO

  • Connector: RJ11
  • Dial Mode: DTMF/Pulse Dialing
  • Caller ID: FSK, DTMF
  • Polarity Reversal
  • Answer Delay
  • Busy Tone Detection
  • No Current Detection

Software Features

  • Hunting Group
  • Web ACL
  • Telnet ACL
  • Action URL
  • PPPoE
  • OpenVPN
  • Digitmap
  • Routing Rules based Prefixes
  • Caller/Called Number Manipulation

VOIP (Protocol)

  • SIP v2.0 (UDP/TCP), RFC3261
  • SDP, RTP(RFC2833), RFC3262, RFC3263, RFC3264, RFC3265, RFC3515, RFC2976, RFC3311
  • RTP/RTCP, RFC2198, RFC1889
  • IPv4 and lPv6
  • Outbound Proxy
  • RFC2806 TEL URI
  • RFC3581 NAT, rport
  • VLAN 802.1P/802.1Q
  • RFC4028 Session Timer
  • DNS SRV/A Query/NATPR Query
  • NAT: STUN, Static/Dynamic NAT

Maintance

  • SNMP v1/v2/v3
  • Auto Provisioning
  • Web Configuration
  • Backup/Restore
  • Firmware Upgrade via Web
  • CDR
  • IPOE
  • Syslog(Emerg, alert, critical, error, warning, notice, info, debug)
  • Ping/Tracert Test
  • Network Capture
  • NTP/Daylight Saving Time
  • lVR local Maintenance
  • Cloud-based Management
Download:
Demo:

Online Demo

Username: Viewer
Password: Viewer123!

Supports 4 FXS/FXO ports;

Use standard SIP protocol;

Specially designed for SMBs and SOHOs;

Compatible with leading IMS/NGN platform, IPPBX and SIP servers.

Specifications:

OpenVox MAG1000 Series Analog VoIP Gateway supports 16/24/32 ports of FXO/FXS port combination. With the features of exquisite enclosure and high performance, MAG series analog gateways are specially designed to save space and maximize cost savings.It is an excellent solution for the industry VoIP analog gateway.

It can be configured for different country uses, provides a wide selection of codecs including G.711A、G.711U、G.729、G.722、G.726、OPUSAMRAMR-WB. The MAG Analog VoIP Gateways use standard SIP protocol and fully compatible with Leading IMS/NGN platform, IPPBX and SIP servers. It has obtained professional CE certification.

Technical Specifications:

Product MAG1000 
Models MAG1000-16S   |   MAG1000-16O MAG1000-24S   |   MAG1000-24O MAG1000-32S   |   MAG1000-32O
Ports 16 FXS/FXO ports 24 FXS/FXO ports 32 FXS/FXO ports
Port type RJ11/RJ45(Standard)  RJ21(Optional)
Ethernet Ports 2 * 10/100Mbps Ports
Console RJ45
Dimension(bare) 440*45*220mm
Dimension(with packaging) 510*90*310mm
Weight(with packaging) 2.86kg 2.98kg 3.1kg
Maximum Power Consumption 20W 28W 36W
Power Supply 90-264VAC
Operation Temperature 0°C ~ 45°C
Operation Humidity Range 10% ~ 90% NON-CONDENSING
Storage Temperature Range -20°C ~ 70°C
Short/Long Haul Ring Load 2 REN, up to 3km on 24AWG line
Certification CE

 

Software & Platform:

  • Linux OS
Features:

Physical Interfaces (Capacity & Ethernet Interfaces)

  • 16/24/32 FXS with RJ11 & RJ21
  • 16/24/32 FXO with RJ11 & RJ21
  • 1*WAN, 10/100Mbps, RJ-45
  • 1*LAN, 10/100Mbps, RJ-45

Voice & FAX

  • G.711A/U, G.729A, G.722, G.726, OPUS, AMR, AMR-WB
  • Comfort Noise Generation (CNG)
  • Modem/POS
  • Adaptive (Dynamic) Jitter Buffer
  • Programmable Gain Control
  • DTMF mode: Signal/RFC2833/INBAND
  • T.38/Pass-through
  • Echo Cancellation (G.168), with up to 128ms

Call Features

  • Call Waiting
  • Blind Transfer
  • Attend Transfer
  • Call Forward on Busy
  • Call Forward on No Reply
  • Unconditional Call Forward
  • Warm/lmmediately Hotline
  • Message Waiting Indicator
  • SlP registration to different servers
  • Call Hold
  • Do-not-disturb
  • 3-Way Conference
  • Speed Dial

FXS

  • Connector: RJ11
  • Dial Mode: DTMF and Pulse
  • Pulse: 10 and 20 PPS
  • Caller ID: DTMF/FSK CLI Presentation
  • Max Cable Length:3 km
  • Reversed Polarity
  • Programmable Call Progress Tone

FXO

  • Connector: RJ11
  • Dial Mode: DTMF/Pulse Dialing
  • Caller ID: FSK, DTMF
  • Polarity Reversal
  • Answer Delay
  • Busy Tone Detection
  • No Current Detection

Software Features

  • Hunting Group
  • Web ACL
  • Telnet ACL
  • Action URL
  • PPPoE
  • OpenVPN
  • Digitmap
  • Routing Rules based Prefixes
  • Caller/Called Number Manipulation

VOIP (Protocol)

  • SIP v2.0 (UDP/TCP), RFC3261
  • SDP, RTP(RFC2833), RFC3262, RFC3263, RFC3264, RFC3265, RFC3515, RFC2976, RFC3311
  • RTP/RTCP, RFC2198, RFC1889
  • IPv4 and lPv6
  • Outbound Proxy
  • RFC2806 TEL URI
  • RFC3581 NAT, rport
  • VLAN 802.1P/802.1Q
  • RFC4028 Session Timer
  • DNS SRV/A Query/NATPR Query
  • NAT: STUN, Static/Dynamic NAT

Maintance

  • SNMP v1/v2/v3
  • Auto Provisioning
  • Web Configuration
  • Backup/Restore
  • Firmware Upgrade via Web
  • CDR
  • IPoE
  • Syslog(Emerg, alert, critical, error, warning, notice, info, debug)
  • Ping/Tracert Test
  • Network Capture
  • NTP/Daylight Saving Time
  • lVR local Maintenance
  • Cloud-based Management
Download:
Demo:

Online Demo

Username:viewer
Password: Viewer123!

Supports 16/24/32 ports of FXO/FXS port combination;

Use standard SIP protocol;

Compatible with Leading IMS/NGN platform, IPPBX and SIP servers.

Specifications:

OpenVox iAG800 Series Analog VoIP Gateway supports 2/4/8 ports of FXO/FXS port combination. With features of small size, exquisite enclosure and high performance, the iAG Analog VoIP Gateway is specially designed for saving space and maximizing cost savings, it is ideal for SMBs and SOHOs.

It can be configured for different country uses, provides a wide selection of codecs including G.711A、G.711U、G.729、G.722、G.726、OPUSAMRAMR-WB. The iAG Analog VoIP Gateways use standard SIP protocol and fully compatible with Leading IMS/NGN platform, IPPBX and SIP servers. 

Technical Specifications:

Models iAG800 V2-2S2O iAG800 V2-4S4O iAG800 V2-4S iAG800 V2-8S iAG800 V2-4O iAG800 V2-8O
Ports 2 FXS ports and 2 FXO ports 4 FXS ports and 4 FXO ports 4 FXS ports 8 FXS ports 4 FXO ports 8 FXO ports
Ethernet Ports 2 * 10/100Mbps Ports
Weight 637g
Dimension 19cm*14.2cm*3.5cm
Power Supply 12V DC/2A
Maximum Power Consumption 12W
Operation Temperature 0°C ~ 50°C
Operation Humidity Range 10% ~ 90% NON-CONDENSING
Storage Temperature Range -20°C ~ 70°C
Short/Long Haul Ring Load 2 REN, up to 3km on 24AWG line
Certification CE, FCC

 

Software & Platform:

  • Linux OS
Features:

Physical Interfaces (Capacity & Ethernet Interfaces)

  • 2/4/8 FXS with RJ11
  • 2/4/8 FXO with RJ11
  • 1*WAN, 10/100Mbps, RJ-45
  • 1*LAN, 10/100Mbps, RJ-45

Voice & FAX

  • G.711A/U, G.729A, G.722, G.726, OPUS, AMR, AMR-WB
  • Comfort Noise Generation (CNG)
  • Modem/POS
  • Adaptive (Dynamic) Jitter Buffer
  • Programmable Gain Control
  • DTMF mode: Signal/RFC2833/INBAND
  • T.38/Pass-through
  • Echo Cancellation (G.168), with up to 128ms

Call Features

  • Call Waiting
  • Blind Transfer
  • Attend Transfer
  • Call Forward on Busy
  • Call Forward on No Reply
  • Unconditional Call Forward
  • Warm/lmmediately Hotline
  • Message Waiting Indicator
  • SlP registration to different servers
  • Call Hold
  • Do-not-disturb
  • 3-Way Conference
  • Speed Dial

FXS

  • Connector: RJ11
  • Dial Mode: DTMF and Pulse
  • Pulse: 10 and 20 PPS
  • Caller ID: DTMF/FSK CLI Presentation
  • Max Cable Length:3 km
  • Reversed Polarity
  • Programmable Call Progress Tone

FXO

  • Connector: RJ11
  • Dial Mode: DTMF/Pulse Dialing
  • Caller ID: FSK, DTMF
  • Polarity Reversal
  • Answer Delay
  • Busy Tone Detection
  • No Current Detection

Software Features

  • Hunting Group
  • Web ACL
  • Telnet ACL
  • Action URL
  • PPPoE
  • OpenVPN
  • Digitmap
  • Routing Rules based Prefixes
  • Caller/Called Number Manipulation

VOIP (Protocol)

  • SIP v2.0 (UDP/TCP), RFC3261
  • SDP, RTP(RFC2833), RFC3262, RFC3263, RFC3264, RFC3265, RFC3515, RFC2976, RFC3311
  • RTP/RTCP, RFC2198, RFC1889
  • IPv4 and lPv6
  • Outbound Proxy
  • RFC2806 TEL URI
  • RFC3581 NAT, rport
  • VLAN 802.1P/802.1Q
  • RFC4028 Session Timer
  • DNS SRV/A Query/NATPR Query
  • NAT: STUN, Static/Dynamic NAT

Maintance

  • SNMP v1/v2/v3
  • Auto Provisioning
  • Web Configuration
  • Backup/Restore
  • Firmware Upgrade via Web
  • CDR
  • IPOE
  • Syslog(Emerg, alert, critical, error, warning, notice, info, debug)
  • Ping/Tracert Test
  • Network Capture
  • NTP/Daylight Saving Time
  • lVR local Maintenance
  • Cloud-based Management
Download:

Supports 2/4/8 ports of FXO/FXS port combination;

Use standard SIP protocol;

Compatible with Leading IMS/NGN platform, IPPBX and SIP servers.

Specifications:

OpenVox MAG1100 is a multifunctional analog gateway for seamless connection between IPPBX, fax machines, analog phones and operators. MAG1100 analog gateway supports 48/72/96 FXS interfaces with modular design, allowing for flexible addition or removal of module boards as needed. It provides RJ21/RJ45 interface modules, 2 100Mbps Ethernet ports, 1 SFP port, and 1 Console port. Additionally, it offers excellent capacity for concurrent voice/fax processing, delivering strong performance and high stability, thus providing high-quality communication services for service providers, enterprises, call centers, and residential users in communities.

The MAG1100 analog gateways, compatible with the OIAD gateway system developed by OpenVox, offer support for various codecs such asG.711A, G.711U, G.729A, G.722, G.726 and more. MAG1100 series use standard SIP protocol and compatible with leading VoIP platform, IPPBX and SIP servers, such as Asterisk, Issabel, 3CX, FreeSWITCH ,BroadSoft and VOS VoIP operating platform.

 

Technical Specifications:

  MAG1100 Series Analog Gateway
Interface Support 48/72/96 ports
Interface Type Support RJ21/RJ45
Ethernet Port 2 * 10/100Mbps ports
Console 1*RS232(RJ45)
Network Interface 1*SFP
Dimension 440*44.5*335mm
Weight
4.5kg
Max Power Consumption 120W
Power Supply 100-240VAC
Operation Temperature 0°C ~ 45°C
Operation Humidity Range 10% ~ 90% NON-CONDENSING
Storage Temperature Range -20°C ~ 70°C
Certification CE

 

Features:

Physical Interfaces (Capacity & Ethernet Interfaces)

  • 48/72/96 FXS with RJ21
  • 1 * Console RS232 (RJ45)
  • RJ45/RJ21
  • 1*WAN, 10/100Mbps, RJ-45
  • 1*LAN, 10/100Mbps, RJ-45
  • 1 * SFP

Voice & FAX

  • G.711A/U, G.729A, G.722, G.726, OPUS, AMR and AMR-WB
  • Comfort Noise Generation (CNG)
  • Modem/POS
  • Adaptive (Dynamic) Jitter Buffer
  • Programmable Gain Control
  • DTMF mode: Signal/RFC2833/INBAND
  • T.38/Pass-through
  • Echo Cancellation (G.168), with up to 128ms

Call Features

  • Call Waiting
  • Blind Transfer
  • Attend Transfer
  • Call Forward on Busy
  • Call Forward on No Reply
  • Unconditional Call Forward
  • Warm/lmmediately Hotline
  • Message Waiting Indicator
  • SlP registration to different servers
  • Call Hold
  • Do-not-disturb
  • 3-Way Conference
  • Speed Dial

FXS

  • Connector: RJ21/RJ45
  • Dial Mode: DTMF and Pulse
  • Pulse: 10 and 20 PPS
  • Caller ID: DTMF/FSK CLI Presentation
  • Max Cable Length:3 km
  • Reversed Polarity
  • Programmable Call Progress Tone

VoIP (Protocol)

  • SIP v2.0 (UDP/TCP), RFC3261
  • SDP, RTP(RFC2833), RFC3262, RFC3263, RFC3264, RFC3265, RFC3515, RFC2976, RFC3311
  • RTP/RTCP, RFC2198, RFC1889
  • IPv4 and lPv6
  • Outbound Proxy
  • RFC2806 TEL URI
  • RFC3581 NAT, rport
  • VLAN 802.1P/802.1Q
  • RFC4028 Session Timer
  • DNS SRV/A Query/NATPR Query
  • NAT: STUN, Static/Dynamic NAT

Software Features

  • Hunting Group
  • Web ACL
  • Telnet ACL
  • Action URL
  • PPPoE
  • OpenVPN
  • Digitmap
  • Routing Rules based Prefixes
  • Caller/Called Number Manipulation
  • VEX (Advanced Peer To Peer Call)

Maintance

  • SNMP v1/v2/v3
  • Auto Provisioning
  • Web Configuration
  • Backup/Restore
  • Firmware Upgrade via Web
  • CDR
  • IPOE
  • Syslog (Emerg, alert, critical, error, warning, notice, info, debug)
  • Ping/Tracert Test
  • Network Capture
  • NTP/Daylight Saving Time
  • lVR local Maintenance
  • Cloud-based Management
Download:
Demo:

Online Demo

Username: viewer
Password: Viewer123!

Supports 48/72/96 FXS ports;

Use standard SIP protocol;

Compatible with Leading IMS/NGN platform, IPPBX and SIP servers.